STO1625
Flatbed Digital Cutting Machine
100 Sets / Month In Stock
T/T, Credit Cards, e-Checking, Alibaba Trade Assurance
STYLECNC
CNC gasket cutting machine is an industrial automatic knife cutter to cut asbestos gaskets, asbestos gaskets, rubber gaskets, non-asbestos plate gaskets, aramid gaskets, cylinder gaskets, rubber gaskets, cotton rubber sheet gaskets, silicone gaskets. It consists of a machine base, a power transmission mechanism, a cutting mechanism and a ruler base.
Gasket is a material placed between two planes to strengthen sealing. There are various shapes of gaskets, and it is difficult to cut special-shaped gaskets with conventional gasket cutting tools. The CNC gasket cutting machine produced by STYLECNC can completely realize the cutting of complex gasket shapes.
Automatic CNC gasket cutting machine is suitable for cutting any material, with high cutting precision and no thermal deformation. It is a relatively environmentally friendly cutting method.
1. High speed with high quality, its cutting speed is 5-8 times faster than laser cutting machine.
2. Advanced computerized CNC system, which is easy to operate with Ethernet port.
3. The cutting without air pollution, no burnt edge, uniform in color.
4. CNC automatic gasket cutting machine can cut soft materials with perfect edges and corner.
5. CNC automatic gasket cutter machine adopts Japan Panasonic servo motor and driver, fast cutting speed with high precision.
6. Automatic CNC gasket cutter machine can be equipped with different tools to meet a variety of needs.
7. Special safety sensing device meets the European standard.
Model | STO1625 |
Working area | 1600*2500mm |
Rated power | 11KW |
Fixed mode | Flat plate table (auto feeding table optional) |
Safety device | Using infrared sensors, responsive, safe and reliable. |
Translational velocity | 800-1200mm/s |
Cutting speed | 200-800mm/s(according to different cutting materials) |
Cutting thickess | ≤50mm(according to different cutting materials) |
Repated accuracy | ≤0.1mm |
Capacity | 2GB |
Transmission system | Panasonic servo motor,Taiwan linear guide |
Instruction system | HP-GL compatible format |
Control system | Kinco |
Voltage | 220V±10% or 380V±10% |
1. Vibration knife.
2. Circular knife.
3. Punching knife.
4. Oblique knife.
5. Marking pen.
6. Punch roller.
7. Milling spindle.
8. Cross positioning laser.
9. Projector.
10. CCD camera.
1. Equipped with an intelligent cutting head, tools can be changed according to requirements and all kinds of gaskets can be cut effectively with strong practicability.
2. All electrical components and pneumatic components use well-known brand products to ensure the stability and reliability of the whole machine for long-term use.
3. The equipment has high cutting precision and extremely small error, which meets the strict requirements of gasket production for precision.
4. Pneumatic knife cutting, the cutting surface is smooth and round, no secondary processing is required, and it can be used directly, reducing the production process and improving production efficiency.
5. The cutting accuracy of this machine is 0.01mm, the reset accuracy is 0.01mm, the product error is ±0.03mm, and the cutting surface smoothness can be reached, which can greatly save the waste material of multi-cavity.
6. Vacuum adsorption of the cut products, so that the finished products have higher precision.
7. Automatic feeding device is optional, which can realize continuous feeding, realize long-span cutting, unlimited theoretical cutting length, improve production efficiency, and have a high degree of automation.
8. According to the customer's product requirements, various knife can be choose.
CNC gasket cutting machine can cut a variety of gaskets, including cork rubber gasket, non asbestos gasket, rubber gasket, graphite seal gasket, reinforced gasket without air pollution, no burnt edge, it can also cut fabric, leather, cardboard, plastic, paper, rubber, sponge and foam, etc.
CNC gasket cutting machine is widely used in packaging protection, advertising display, terminal insulation, model/mock up making, puzzle and pattern cutting, etc.
1. Before starting the machine every day, turn on the air pump, then turn on the computer and software, and then turn on the control box. After use, please turn off the power in sequence, first turn off the air compressor, computer, vacuum pump, and finally the equipment and air valve switch.
2. It is necessary to clean up the dirt on the machine tool and the guide rails during the working day, and keep the bed clean.
3. If you leave the machine for a long time, turn off the power to prevent non-professional operation and cause some unnecessary damage.
4. The machine should be thoroughly cleaned every week, the horizontal and vertical guide rails, the transmission gear racks should be cleaned, and the lubricating oil should be filled.
CNC automatic gasket cutting machine is used for sample making and small batch production, to solve the contradiction of small order, many styles and short delivery time, to meet the ever-changing consumer demand, help enterprises to quickly seize market opportunities, and improve the market competitiveness of enterprises, so suitable for many small and medium-sized enterprises.
All the CNC machines can be shipped worldwide by sea, by air or by international express logistics via DHL, FEDEX, UPS. You are welcome to get a free quotation by filling up the form with name, email, detailed address, product and requirements, we will shortly contact you with the full information including the most suitable delivery method (fast, secure, discreet) and freight.
Troy Tipton
from Australia
Post on Feb 19, 2018
A good gasket cutting machine. I like the oscillating knife cutter with high precision, I am satisfied.
MilapoladeT
from Russia
Post on Sep 13, 2017
A nice CNC gasket cutting machine with pneumatic oscillating knife, I have made a test for gasket cutting, no burnt edge, full automatic with CNC.
Stevan Manzan
from Germany
Post on Aug 20, 2017
Very good gasket cutting machine, very good seller, arrive before the expected and satisfied, we are going to start the jobs.
상훈
from South Korea
Post on Jun 20, 2017
배송도 아주 빨랐고 포장도했습니다. 다양한 개스킷에 적합합니다.
Aaron
from United Kingdom
Post on Dec 03, 2018
I bought this gasket cutting machine for making footpad. It really works nicely so far. Moving speed and cutting speed are very fast and the cutting edge is very smooth. Recommend indeed.