Affordable fiber laser engravers, fiber laser markers, fiber laser cutters for sale at cost price, with 24/7 free fiber laser machine service, all-around 2D/3D laser engraving, marking and cutting solutions from the best fiber laser machine manufacturer - STYLECNC.
Maragall
From United States
Posted on Jan 13, 2023
My old CO2 laser is limited to cut metal and so I purchased this hybrid laser cutter as an upgrade version. Instructions are easy to follow on how to put it together and set cutting parameters in the controller software. It has worked great for both sheet metal and wood, I have used it to cut a lot of stainless steel and plywood enough to pay for itself. A lot of bang for the money.
Eric Pearson
From United States
Posted on Nov 17, 2022
Surprised at the quality of this compact laser jewelry cutter when it arrived. Put it together in 30 minutes. Small size and easy to move. I bought this unit to make pendant necklaces of silver and gold. It is easy to use with an automatic cutting software and there are no issues so far. I have tried this cutting tool to cut sterling silver sheet and it resulted in clear and smooth pendants without sanding in seconds. I will try to cut more types of metals in the next week.
Alexander Brabyn
From Australia
Posted on Nov 13, 2022
I purchased this fiber laser engraver after researching how to videos and learning its pros and cons in advance. Assembly was sort of easy with the instruction book. The software that comes with it is easy to use. I have done a few tests for 3D deep relief engraving and stippling guns with some examples and a couple of my own creations. It worked well and resulted in smooth and clear patterns. A great gun engraver kit for anyone with intuition and patience on custom personalized firearms. So far it is worth the money.
Hans Thrun
From Australia
Posted on Oct 11, 2022
I use this metal laser cutter to cut stainless steel sheet of 1/4in x 4ft x 8ft to make signs for my advertising business. So far so good. It is easy enough to work with, and cuts well, like a hot knife through butter. Just hope to continue to use for a long time in future. The software came with the machine is easy to use for my business. With remote assistance from STYLECNC, the software installation and setup can be completed in 45 minutes. Excellent customer service and technical support. Also, 1064nm fiber laser beam is dangerous to cause eye injury and hand burns, wear leather gloves and safety glasses when using this machine. Overall, take care. I try to buy well made laser machines that are worth my money, this unit seems to qualify. No real complaints about this cutting tool. Great value. Would highly recommend it.
Derek Christian
From Canada
Posted on Oct 02, 2022
No issues putting it together. Starts easily. Cuts extremely well. My first task with this machine was to cut the 3/8 steel plate, and it cut much better than the industrial units I am used to. I should mention that this fiber laser machine does NOT require you to touch the work to start the cutting with CNC controller which makes it VERY easy to use. A great laser cutter for sheet metal at a great price.
Clint GROSS
From United States
Posted on Aug 25, 2022
Bought this laser cutter to upgrade my metal crafting in commercial use. It is fast and easy to use with smooth clean cut, and save you much more cost and time compared to waterjet and plasma cutters. In additional, it is an auomatic power tool with CNC contoller compared to handheld tin snips and shears. This machine has been cutting exactly as I expected. It is great to cut the edge of sheet metals. I have cut over 100 Pcs of 4x8 stainless steel plates 304 so far with no issues. Expect it to perform better in the future.
Edward Stratton
From United States
Posted on Aug 06, 2022
The IPG laser metal cutter is easy to setup and use for a novice user, it cuts great on 1/2 inch stainless steel sheet and 9/16 aluminum sheet at a higher speed up to 160 inches per minute, as well as works on 2 inch mild steel plate at a lower speed of 20 inches per minute. It cuts through with smooth edges, much better than the plasma cuts. In additional, its an automatic precision metal cutting tool with CNC controller, almost no need of manual intervention.
Derek Christian
From Canada
Posted on Jul 28, 2022
I was wary of purchasing a Chinese-made laser cutter off the internet, but the reviews convinced me to give it a try. Got this unit in 28 days. No trouble in assembly and parameter setting. Ive tried it to cut 304 and 316 stainless steel plates and pipes for kitchenware and gotten the cleanest cuts. Its a powerful all-in-one machine for both sheet metals and tubes. No regrets with the buying of this great cutter.
Henry Browne
From United Kingdom
Posted on Jul 09, 2022
STYLECNC is well known for making quality laser cutters. Considering it is a name brand, I bought ST-FC60M for my workshop last month. I have never used an automatic tube cutter like this one. However, it was easy to setup and operate. I used it to cut 5/8 inch OD straight copper and aluminum tubing and 1/4 inch OD D-shaped stainless steel pipe. All the edge cuts flared perfectly without cleanup. Did great jobs with ease. Im impressed with how well it cuts with higher speed and precision.
Dorsett
From Australia
Posted on Jan 14, 2023
I have just received the STJ-50F. Worked out of the box and had no issues at all. Exactly the same as described. I puchased the latest model and the EZCAD software was included. Got the fiber laser engraver up and running with the software installed and my first engraving and cutting in about 30 minutes. Resulted in clear smooth edges and lines. Easy to use for a novice with the instructional videos. Great for the price and worth buying. Recommend getting the exhaust fan, which is a must have for indoor use.